SP131/3R-S Air Nutrunner
Product number:
20113500
SP131/3R-S Air Nutrunner
Applications
This air nutrunner motor is intended for installation in bolting units and assembly systems with one or more tightening spindles and its design makes it ideal for use in industrial automation. It can also be installed in single station solutions with multi-spindle units. Possible applications would be the use in automatic assembly lines, rotary indexing machines, multiple screwdriving units and screw slides as well as the integration in robot arms.
Air nutrunner SP131/3R-D with slip clutch, clockwise rotation
Torque range: 0.8 - 2.2 Nm / 1.8 - 3.0 NmSpeed: 1,300 min-1
Power: 130 W
Clockwise running direction to screw in.
Push start via axial pressure - as soon as 2 to 3 kg of pressure is applied, the motor switches on.
This start system is preferably used in feed screw units (hybrid assembly systems).
Air nutrunner motors with slip clutch are versatile and therefore the best solution when assembling many types of materials. Even when assembling different qualities, these screwdriver spindles offer a lot of flexibility. Especially when using self-tapping screws, air nutrunner motors with slip clutch are the first choice.
There is no risk of overheating with these rugged, high-performance air nutrunner motors.
Even with continuous operation, frequent starts/stops or, if necessary, reversal of the direction of rotation (UD types), they provide constant performance over the long term, even under the most severe operating conditions.
By using high-quality components and materials, the tightening spindles have a long service life and low maintenance costs.
The installed thrust bearings withstand the demands of automated production cycles.
The low space requirement and low weight also allow installation in multiple screw spindle units.
The recessed nutrunner motor is equipped with a safety bush, which prevents the accessories from accidentally falling out during difficult production cycles.
The air nutrunner motor has the ideal design for mounting in your machines.
Connection to an oil separator to reduce oil mist emissions is possible.
In the accessories you will find suitable length compensators to compensate for any height differences of the screws. They reduce the axial pressure on the mechanical part of the motor, protect the internal components and increase the service life.
| Antrieb: | Druckluft |
|---|---|
| Werkzeugform: | Gerade |
| Start: | durch axialen Andruck |
| Kupplung: | Rutschkupplung |
| Leistung: | 130 |
| Drehmomentbereich: | 0.8 - 3.0 |
| Betriebsdruck: | 6.3 |
| Luftverbrauch: | 7.0 |
| Empf. Schlauch-Ø: | 6 |
| Signalanschluss: | M5 |
| Gewicht: | 0.73 |
| Länge: | 232.5 |
| Gehäuse Ø: | 32 h7 |
| Drehrichtung: | rechtsdrehend |
| Drehzahl: | 1300 |
| Air consumption: | 7.0 l/s |
| Anschluss Zuluft: | G 1/8" |
| Aufnahme: | Klingenaufnahme, Innensechskant 1/4" (6,35 mm) |
| Chuck: | Standard chuck, female hex. 1/4" (6.35 mm) |
| Clutch: | Slip Clutch |
| Construction form: | Straight |
| Current: | Pneumatic |
| Direction of rotation: | clockwise |
| Drehmoment Feder: | eingbaut / mitgeliefert0.8 - 3.0 / 0.4 - 1.2 |
| Housing Ø: | 32 h7 mm |
| Inlet air connection: | G 1/8" |
| Length: | 232.5 mm |
| P_Max. Betriebsdruck: | 6.3 bar |
| Power: | 130 W |
| Recommended hose Ø: | 6 mm |
| Signal connection: | M5 |
| Speed: | 1300 min-1 |
| Start: | by axial pressure |
| Torque range: | 0.8 - 3.0 Nm |
| Torque range spring: | assembled / optional0.8 - 3.0 / 0.4 - 1.2 Nm |
| Weight: | 0.73 kg |
Accessory Items
Similar Items
