SW30/11 D Angle screw driver
Product number:
22113000
Ölfreier Betrieb möglich
SW30/11 D Angle screw driver
Applications
The compressed air angle screwdriver SW30/11D with direct clutch is ideal for screwing in narrow and hard to reach places. Due to the direct clutch it is preferably used for screw connections with different material structures, e.g. wood. The torque is adjusted via the air pressure.
Torque: max. 11 Nm
Chuck: 3/8" square
Speed 1,100 min-1
The torque is adjusted via the compressed air.
Thanks to the speed, short screwing cycles are guaranteed.
The mounting at an angle of 90° allows the installation of screws in places that are difficult to reach.
For exact dimensions please refer to the technical data or our data sheet.
The handle is thermally insulated for comfort and grip. You have control of the tool at all times.
With 1.4 kg the angle nutrunner has a very good power-to-weight ratio.
The direction of rotation can be easily changed by means of a slide switch.
It is started comfortably via a long start lever.
Above 4 Nm cut-off torque, we recommend a support, this relieves the operator in case of frequent screwing cycles.
Oil-free operation in sensitive areas is possible.
Technical specifications
Chuck: 3/8" square
Speed 1,100 min-1
SW30/11D - Angled screwdriver for difficult to reach places
This screwdriver has a high torque up to max. 11 Nm.The torque is adjusted via the compressed air.
Thanks to the speed, short screwing cycles are guaranteed.
The mounting at an angle of 90° allows the installation of screws in places that are difficult to reach.
For exact dimensions please refer to the technical data or our data sheet.
The handle is thermally insulated for comfort and grip. You have control of the tool at all times.
With 1.4 kg the angle nutrunner has a very good power-to-weight ratio.
The direction of rotation can be easily changed by means of a slide switch.
It is started comfortably via a long start lever.
Above 4 Nm cut-off torque, we recommend a support, this relieves the operator in case of frequent screwing cycles.
Oil-free operation in sensitive areas is possible.
| Antrieb: | Druckluft |
|---|---|
| Start: | Ventilhebel |
| Kupplung: | Direktkupplung |
| Leistung: | 300 |
| Drehmomentbereich: | max. 11 |
| Betriebsdruck: | 6.3 |
| Empf. Schlauch-Ø: | 9 |
| Gewicht: | 1.04 |
| Maß E: | 36 mm |
| Maß D: | 12 |
| Maß C: | 14 |
| Maß B: | 100 |
| Maß A: | 156 |
| Gehäuse Ø: | 40 |
| Drehrichtung: | Umsteuerbar |
| Drehzahl: | 1100 |
| Anschluss Zuluft: | G 1/4" |
| Aufnahme: | Vierkant 3/8" |
| Chuck: | Square 3/8" |
| Clutch: | Direct clutch |
| Construction form: | Angle head 90° |
| Current: | Pneumatic |
| Dimension A: | 156 mm |
| Dimension B: | 100 mm |
| Dimension C: | 14 mm |
| Dimension D: | 12 mm |
| Dimension E: | 36 mm |
| Direction of rotation: | Reversible |
| Housing Ø: | 40 mm |
| Inlet air connection: | G 1/4" |
| P_Max. Betriebsdruck: | 6.3 bar |
| Power: | 300 W |
| Recommended hose Ø: | 9 mm |
| Speed: | 1100 min-1 |
| Start: | Valve lever |
| Torque range: | max. 11 Nm |
| Vibration: | < 2.5 m/s2 |
| Vibration: | < 2.5 |
| Weight: | 1.04 kg |
| Werkzeugform: | Winkelkopf 90° |
Zubehör
Ähnliches
