CK40/900-A GRP Cutter
| Power: | 400 W |
|---|---|
| Speed: | 9000 min-1 |
| Wheel Ø: | 100 mm |
| Cutting depth: | 15 mm |
| Dust extraction: | external dust extraction |
| Current: | Pneumatic |
Product number:
63141000
CK40/900-A GRP Cutter
Applications
The compressed air GRP cutter CK40/900-A is a professional cutting tool with suction for dust-free cutting of GRP, CFRP and plastics. Thus it is used in vehicle, aircraft and boat construction as well as in the rotor blade production of wind turbine manufacturers. But the pneumatic GRP-cutter can also be used well in general plastic production or in light and switch cabinet construction.
Disc diameter of 100 mm
15 mm cutting depth
Optimum cutting speed
Clean cut
Lightweight tool
Support edge for safe tool guidance
Effective dust extraction directly at the point of origin
The CK40/1200-A compressed air GRP cutter is a versatile tool for form cutting thanks to its disc diameter of 100 mm. With its 15 mm cutting depth, it cuts plastic and GRP plates also due to the well-adjusted cutting speed and reliably delivers clean cuts that hardly require reworking. The tool effectively sucks the unwanted, often health-damaging dusts into an external dust extraction system directly at the point of origin. The good supporting edge makes this light and handy tool a precise and easy to use tool for industrial use.
Technical specifications
15 mm cutting depth
Optimum cutting speed
Clean cut
Lightweight tool
Support edge for safe tool guidance
Effective dust extraction directly at the point of origin
The CK40/1200-A compressed air GRP cutter is a versatile tool for form cutting thanks to its disc diameter of 100 mm. With its 15 mm cutting depth, it cuts plastic and GRP plates also due to the well-adjusted cutting speed and reliably delivers clean cuts that hardly require reworking. The tool effectively sucks the unwanted, often health-damaging dusts into an external dust extraction system directly at the point of origin. The good supporting edge makes this light and handy tool a precise and easy to use tool for industrial use.
| Power: | 400 W |
|---|---|
| Speed: | 9000 min-1 |
| Chuck: | Clamping chuck Ø 19 mm |
| Start: | Valve lever |
| Wheel Ø: | 100 mm |
| Cutting depth: | 15 mm |
| Connection dust extraction: | Ø 27 mm |
| Dust extraction: | external dust extraction |
| Housing Ø: | 46 mm |
| Length [mm]: | 250 |
| Weight: | 1.62 kg |
| Recommended hose Ø: | 9 mm |
| Air consumption: | 10 l/s |
| Sound pressure level: | 81 dB(A) |
| Current: | Pneumatic |
| Working pressure: | 6.3 bar |
| Inlet air connection: | G 1/4" |
| Vibration: | < 2.5 m/s² |
Similar Articles
Extras
