GIS-V-AP5/132 Safety cutting machine with battery pump
| Cutting Ø: | max. 132 mm |
|---|---|
| Cutting force: | 85 kN |
| Head: | closed |
| Hydraulic connection: | Kupplung und Nippel (CEJN Serie 117) |
| Battery voltage: | 2x Makita 18 V |
Product number:
73523600
Ergonomic
Tool control
2-step hydraulic
Battery Control
18 V Makita-kompatibel
GIS-V-AP5/132 Safety cutting machine with battery pump
Applications
Non-interchangeable Safety cutting unit with Battery pump AP550-05-V-GIS for safe cutting of cables whose de-energized state cannot be determined beyond doubt. Assembled to DIN EN 50340, in compliance with the GS ET-23 test principles and certified by us - for optimum protection in the event of a short circuit for voltage levels up to 30,000 V.
CEJN 117 Coupling system for isolated circuit
No connection of components with hydraulic oil possible
Cutting head PH132-V-GIS with 132 mm opening width
Battery pump AP550-05-V-GIS with pressure gauge for visual inspection of pressure curve
Fast cutting due to 2-step hydraulic
Maximum safety for voltage levels up to 30 kV
Grounding system on foot pump provided for connection of a ground stake
Compact Case.
Important Note: The testing and certification of our safety cutting systems is mandatory for the assembled components and the associated documentation (serial numbers). If components are retrofitted or replaced, the entire system must be inspected and recertified by HOLGER CLASEN.
Technical specifications
No connection of components with hydraulic oil possible
Cutting head PH132-V-GIS with 132 mm opening width
Battery pump AP550-05-V-GIS with pressure gauge for visual inspection of pressure curve
Fast cutting due to 2-step hydraulic
Maximum safety for voltage levels up to 30 kV
Grounding system on foot pump provided for connection of a ground stake
Compact Case.
Important Note: The testing and certification of our safety cutting systems is mandatory for the assembled components and the associated documentation (serial numbers). If components are retrofitted or replaced, the entire system must be inspected and recertified by HOLGER CLASEN.
| Cutting Ø: | max. 132 mm |
|---|---|
| Cutting force: | 85 kN |
| Opening width: | 132 mm |
| Head: | closed |
| Lock type: | Bolt safety |
| Hydraulic connection: | Kupplung und Nippel (CEJN Serie 117) |
| Working pressure: | 625 bar |
| Battery voltage: | 2x Makita 18 V |
| Capacity: | 5.0 Ah |
| Charging time: | 45 min |
| Weight: | 26 kg |
| Information: | Nominal voltage on cable:max. 30 kV |
Similar Articles
Extras
