GW210/85 V-5/8 Angle grinder
| Power [W]: | 2100 |
|---|---|
| Speed: | 8500 / min |
| Wheel Ø: | 180 mm |
| Current: | Pneumatic |
Product number:
12167300
Two-hand operation
Low-vibration type
Quick change of accessory
GW210/85 V-5/8 Angle grinder
Applications
The pneumatic angle grinder GW210/85V-5/8 for grinding plates Ø 180 mm is intended for grinding works. The very good power weight ratio and the flexible design makes it ideally for industrial applications. This powerful air angle grinder is used in machine building, garages, craft sector, ship yards and automobile industry.
2,100 W power for high removal capacity.
Centrifugal governor for consistent speed under load.
Very good power-weight ratio of 920 W/kg.
The vibration reducing handle and the autobalancer device (for reduction of unbalance and vibration) enable fatigue-free working.
Spindle lock for easy change of accessory.
The additional handle can be mounted on both sides and is individual adjustable.
Technical specifications
Centrifugal governor for consistent speed under load.
Very good power-weight ratio of 920 W/kg.
The vibration reducing handle and the autobalancer device (for reduction of unbalance and vibration) enable fatigue-free working.
Spindle lock for easy change of accessory.
The additional handle can be mounted on both sides and is individual adjustable.
| Power [W]: | 2100 |
|---|---|
| Speed: | 8500 / min |
| Wheel Ø: | 180 mm |
| Start: | Ventilhebel unten |
| Handling: | Two-hand operation |
| Weight [kg]: | 2.3 |
| Recommended hose Ø: | 15 mm |
| Air consumption: | 17 / 36 l/s |
| Sound pressure level: | 87 dB(A) |
| Sound power level: | 98 dB(A) |
| Current: | Pneumatic |
| Working pressure: | 6.3 bar |
| Chuck: | 5/8" - 11 UNC |
| Inlet air connection: | G 1/2" |
| Vibration: | < 2.5 m/s² |
Similar Articles
Extras
